Electrolux U26226 Talimat Kitapçığı - Sayfa 7

Fırın Electrolux U26226 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Electrolux U26226 20 sayfaları. Electrolux electric built in oven instruction

Sayfayı Yazdır

Electronic Programmer

The oven will only work if the time of day has been set.

However, the oven can also be operated without any programme.

Setting the time of day

When the power supply is switched on, or after a power failure, the "Time of

day" pilot lamp

will flash on the display.

To set the correct time of day:

1. Press button " " or " ".

2. After the setting is carried out, wait for 5 seconds: the "Time of day" pilot

lamp

will go out and the display will show the set time. The appliance

is ready for use.

To reset the correct time of day:

1. Press button

repeatedly to select the "Time of day" function. The

relevant pilot lamp will start flashing. Then proceed as described above.

The time of day can only be reset if no automatic function (cook duration

or end of cooking

"Cooking Duration" function

This function allows the oven to automatically switch off at the end of a

programmed cooking duration time. Place food in the oven, select a cooking

function and adjust the cooking temperature. Press button

select the "Cooking Duration" function. The relevant pilot lamp

flashing. Then, proceed as follows:

To set the duration time:

1. Press button " " or " ".

2. After the setting is carried out, wait for 5 seconds: the "Cooking Duration"

pilot lamp

will come on and the display will revert to the time of day.

3. When cooking time is over, the oven will be switched off automatically

and an acoustic alarm will be heard, while the pilot lamp will start flashing.

Turn the oven function and the thermostat control knob to zero.

To switch off the acoustic alarm, press any button.

NOTE: turning the acoustic alarm off will reset the oven to manual, and

if the oven function and the thermostat knobs are not set to zero the

oven will start to heat again.

To cancel the duration time:

1. Press button

repeatedly to select the "Cooking Duration" function.

The relevant pilot lamp

cooking time.

2. Press button " " until the display shows "0:00". After 5 seconds the

pilot lamp will go out and the display will revert to the time of day.

) has been set.

will flash and the display will show the remaining

1. Push button for selecting a function

2. Decreasing control button " "

3. Increasing control button " "

4. Display

5. "Cooking Duration" pilot lamp

6. "End of cooking" pilot lamp

7. "Minute minder" pilot lamp

8. "Time of day" pilot lamp

repeatedly to

will start