Bosch HBA36B6.0W Kullanım Kılavuzu - Sayfa 10

Fırın Bosch HBA36B6.0W için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bosch HBA36B6.0W 36 sayfaları. Built-in oven

Sayfayı Yazdır

Setting rapid heating

Rapid heating is not suitable for all types of heating.
Suitable types of heating
3D hot air
<
Top/bottom heating
%
HydroBaking
-
Pizza setting
6
A short signal sounds to indicate that the selected type of
heating is not suitable for rapid heating.
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.

Time-setting options

You can call up the time-setting options menu by pressing
the
button. The following functions are available:
0
If the oven is switched off:
= Set timer
U
■
0
= Set clock
■
If the oven is switched on:
= Set timer
U
■
= Set cooking time
r
■
p
= Set a later end time
■
The brackets around the symbol indicate that this function is
selected. Once you have started the oven, the brackets show
which time function is currently counting down in the display.
Setting the time-setting options ­ in brief
Press the
0
button to open the menu.
1.
Select the desired function with the
2.
Set the desired value with the rotary selector.
3.
Press the
button to close the menu.
0
4.
A detailed description of how to adjust each individual function
is provided below.
Short audible signal
If you cannot change or set a value, you will hear a short
audible signal.

Setting the timer

The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time, regardless of whether oven
is switched on or off.
Press the
0
button.
1.
The time-setting options menu appears. The [
brackets shows that the timer function is selected.
Set the running time for the timer using the rotary selector.
2.
Press the
button to close the menu.
0
3.
The time counts down in the clock display.
10
X
button.
] symbol in
U
Setting rapid heating
Press the
c
button to activate rapid heating. The
appears next to the temperature you have set. The temperature
indicator bars start filling in.
Once all the bars are filled, rapid heating is complete. You will
hear a short signal. The
c
in the cooking compartment.
Notes
Rapid heating is cancelled if you change the type of heating.
■
If a cooking time has been set, this runs independently of
■
rapid heating and counts down immediately when operation
is started.
You can use the
button to check the current cooking
°
■
compartment temperature during rapid heating.
To ensure an even cooking result, do not place your dish in
■
the cooking compartment until rapid heating is complete.
Cancelling rapid heating
Press the
button. The symbol goes out.
c
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
‹‹
:
‹‹
. Press the
0
button. The display goes out.
Cancelling the timer time
Press the
button to open the time-setting options menu.
0
Using the rotary selector, turn the time back to
the
0
button to close the menu.
Changing the timer time
Press the
0
button to open the time-setting options menu. Use
the rotary selector to change the time within the next few
seconds. Press the
button to close the menu.
0

Setting the cooking time

If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: setting for
180 °C, cooking time of 45 minutes
Press the
0
button.
1.
The time-setting options menu appears. The time-setting
options are displayed in the left-hand side of the display.
The [
U
] timer function is selected.
Using the
button, move to the [
X
2.
c
symbol goes out. Place your dish
‹‹
:
‹‹
%
top/bottom heating,
] end time.
r
symbol
. Press