Electrolux Arthur Martin AWF8260W Kullanıcı Kılavuzu - Sayfa 8
Yıkayıcı Electrolux Arthur Martin AWF8260W için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Electrolux Arthur Martin AWF8260W 28 sayfaları. Front-loading washing machine
Sayfayı Yazdır
8 electrolux
Daily use
Load the laundry
Open the door by carefully pulling the door
handle outwards. Place the laundry in the
drum, one item at a time, shaking them out
as much as possible. Close the door.
Measure out the detergent and the fab-
ric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent re-
quired, pour it into the main wash compart-
ment
or in the appropriate compartment
if the selected programme/option it requires
(see more details in «Detergent dispenser
drawer»).
If required, pour fabric softener into the com-
partment marked
not exceed the «MAX» mark in the drawer).
Close the drawer gently.
(the amount used must
Select the required programme by
turning the programme selector dial (1)
You can choose the right programme for any
type of laundry following the descriptions on
the washing programme tables (see «Wash-
ing Programmes»). Turn the programme se-
lector dial to the required programme. The
programme selector determines the type of
washing cycle (e.g. water level, drum move-
ment, number of rinses) and the washing
temperature according to the type of laundry.
The pilot light of button 6 starts blinking and
the display shows the duration of the selec-
ted programme. The selector dial can be
turned either clockwise or counterclockwise.
Position
to Reset programme/Switching
OFF the machine.
For the description of each washing pro-
grammes of the selector dial, consult the
chapter «Washing programmes».
At the end of the programme the selec-
tor dial must be turned to position
switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 6 will blink 3 times
and the message Err is displayed on the
display to indicate a wrong selection.
The machine will not perform the new
selected programme.
, to