Electrolux Clarus Vibe WH6-14LAG Kurulum Kılavuzu - Sayfa 28

Yıkayıcı Electrolux Clarus Vibe WH6-14LAG için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Electrolux Clarus Vibe WH6-14LAG 32 sayfaları. Washer extractor

Sayfayı Yazdır

13 Disposal information

13.1 Disposal of appliance at end of life

Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of

the structure that can give or break during scrapping.

The machine's parts must be disposed of in a differentiated way, according to their different characteristics (e.g. met-

als, oils, greases, plastic, rubber, etc.).

Different regulations are in force in the various countries, therefore comply with the provisions of the laws and com-

petent bodies in the country where scrapping takes place.

In general, the appliance must be taken to a specialised collection/scrapping centre.

Dismantle the appliance, grouping the components according to their chemical characteristics, remembering that the

compressor contains lubricant oil and refrigerant fluid which can be recycled, and that the refrigerator and heat pump

components are special waste assimilable with urban waste.

The symbol on the product indicates that this product should not be treated as domestic waste, but must be correctly disposed

of in order to prevent any negative consequences for the environment and human health. For further information on the recy-

cling of this product, contact the local dealer or agent, the Customer Care service or the local body responsible for waste

disposal.

Note!

When scrapping the machine, any marking, this manual and other documents concerning the appliance

must be destroyed.

13.2 Disposal of packing

The packing must be disposed of in compliance with the current regulations in the country where the appliance is

used. All the packing materials are environmentally friendly.

They can be safely kept, recycled or burned in an appropriate waste incineration plant. Recyclable plastic parts are

marked as following examples.

Polyethylene:

• Outer wrapping

• Instructions bag

Polypropylene:

• Straps

Polystyrene foam:

• Corner protectors

Installation manual