Electrolux EFLS210TIW00 Kullanım ve Bakım Kılavuzu - Sayfa 24
Yıkayıcı Electrolux EFLS210TIW00 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Electrolux EFLS210TIW00 29 sayfaları.
Sayfayı Yazdır
24
Solutions to Common Problems
Common Washing Problems, continued
PROBLEM
POSSIBLE CAUSES
Wrinkling
• Overloading the washer.
• Incorrect wash cycle for
wash load.
Yellow buildup of
• Agitation time too short.
body soil on syn-
• Wash water temperature
thetic fabrics
too low.
• Not enough detergent.
Yellow or brown
• Iron or manganese in water
rust stains
supply, water pipes, or water
heater.
Residue stains /
• Moisture in the washer.
buildup, mold or
• Use of non-HE detergent.
mildew stains in
• Overdosing detergent.
gasket
• Overloading wash drum.
• Leaving a wet load set in
washer.
• Cold water washes which
may not completely dissolve
and remove detergents.
Residue stains
• Moisture in the washer.
/ buildup, mold
• Use of non-HE detergent.
or mildew stains
• Overdosing detergent.
in dispenser
drawer
Water in fold of
• Result of washing and part
flexible gasket
of normal operation.
Odor
• Moisture in the washer.
• Use of non-HE detergent.
• Overdosing detergent.
• Leaving a wet load remain
in washer.
• Cold water washes which
may not completely dissolve
and remove detergents.
SOLUTIONS
• Reduce load size.
• Rinse in cold water with liquid
fabric softener using the casual or
delicate cycle.
• Soak in detergent booster or
product containing enzymes.
• Wash in hottest water safe for
fabric using casual cycle.
• Increase detergent.
• Add bleach safe for fabric or treat
with color remover.
• To restore discolored load of
whites, use rust remover safe for
fabric.
• Do not use chlorine bleach to
remove rust stains. It may intensify
discoloration.
• Perform CLEAN WASHER cycle
• Scrub gasket with Comet™ Spray
Gel Mildew Stain Remover using
brush to remove stains.
• Use only HE (high efficiency de-
tergent) along with recommended
dosage.
• Remove wash load immediately
upon cycle completion.
• Remove dispenser drawer and
wipe dispenser and inserts with
combination of ¾ cup liquid
chlorine bleach and one gallon
hot water. Rinse well, and repeat if
necessary. Return drawer to loca-
tion. NOTE: Wear rubber of latex
gloves. Protect floor and clothing
from bleach damage.
• Use only HE (high efficiency de-
tergent) along with recommended
dosage.
• At the end of each wash, dry inside
of gasket fold with clean dry towel
all around gasket.
• Perform CLEAN WASHER cycle.
• At the end of each wash, dry inside
of gasket fold with clean, dry towel
all around gasket.
• Use only HE (high efficiency de-
tergent) along with recommended
dosage.
• Remove wash load immediately
upon cycle completion.
• Pour one cup liquid chlorine bleach
in standpipe; let remain a day and
flush with water.
PREVENTIVE MEASURES
• Do not overload washer.
• Remove items from washer as
soon as cycle is completed.
• Use liquid fabric softener.
• Select correct wash cycle.
• Use correct amount of detergent.
• Wash synthetics frequently using
hot or warm water.
• Use nonprecipitating water soft-
ener.
• Before washing, run hot water for a
few minutes to clear lines.
• Drain water heater occasionally.
• For an ongoing problem, install
an iron filter in your water supply
system.
• Run dehumidifier in laundry room.
• Avoid overfilling detergent and
fabric softener compartments of
dispenser.
• Dry the inside of washer and gasket
after every run.
• Avoid overfilling detergent and
fabric softener compartments of
dispenser.
• Leave door and dispenser drawer
open for a few hours after use or
whenever washer is not in use.