Bosch HBC36D753W Kullanım Kılavuzu - Sayfa 12
Fırın Bosch HBC36D753W için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bosch HBC36D753W 36 sayfaları.
Sayfayı Yazdır
Setting the timer
The timer runs independently of the cooking mode. You can
use it like a kitchen timer and set it at any time.
Press the
button.
0
1.
If applicable, press the
X
2.
to adjust the timer time.
Exit the Time-setting options with the
3.
The display switches to its previous state. The
the timer appears, and the time can be seen counting down.
Changing the timer duration
Press the
0
button. If applicable, press the
the rotary selector within the next few seconds to change the
timer time. Exit the Time-setting options with the
Once the timer duration has elapsed
A signal sounds.
"00:00" is shown in the display. Press the
Q
button to stop the signal.
0
Cancelling the timer duration
Press the
button. If applicable, press the
0
the rotary selector to turn the timer time back to "00:00". Exit
the Time-setting options with the
Setting the cooking time
If you set the cooking time for your dish, the cooking operation
will end automatically after this time. The appliance stops
heating.
For types of heating that involve steam, you must always set a
cooking time.
Example in the picture: Setting a cooking time of 45 minutes.
Prerequisite: The type of heating and temperature must be set.
Press the
button.
0
1.
7LPHVHWWLQJ RSWLRQV
&RRNLQJ WLPH
(QG
([LW ZLWK
Set the cooking time using the rotary selector.
2.
7LPHVHWWLQJ RSWLRQV
&RRNLQJ WLPH
(QG
([LW ZLWK
Press the
button to exit the Time-setting options.
0
3.
If the operation has not yet started, press the
4.
The cooking time counts down on the display.
For the "Steam" type of heating, the cooking time starts
counting down after the heating-up time.
Changing the cooking time
Press the
0
button. Change the cooking time using the rotary
selector. Press the
button to exit the Time-setting options.
0
The cooking time has elapsed
A signal sounds. The appliance stops heating. "00:00:00" is
shown in the display. Press the
Cancelling the cooking time
Press the
button. Set the cooking time to "00:00:00" using
0
the rotary selector. Press the
options.
12
button and use the rotary selector
button.
0
Q
symbol for
X
button and use
button.
0
button and use
X
0
button.
button.
n
0
button to stop the signal.
button to exit the Time-setting
0
Changing the end time
You can change the time at which you wish your dish to be
ready. The appliance starts automatically and is ready at the
desired time. You can, for example, put your dish in the
cooking compartment in the morning and set the cooking time
so that it is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
For some programmes, it is not possible to change the end
time.
For the "Steam" type of heating, the cooking time starts
counting down after the heating-up time. The selected end time
is delayed by the length of the heating-up time.
Example in the picture:
It is 09:30 and the dish will take 45 minutes to cook, but is not
due to be ready until 12:45.
Prerequisites:
The selected cooking operation has not begun yet. A cooking
time has already been set. The
open.
Use the
button to switch to "End".
X
1.
The time at which the cooking operation will finish is shown in
the display.
7LPHVHWWLQJ RSWLRQV
(QG
7LPHU
([LW ZLWK
Use the rotary selector to set a later end time.
2.
7LPHVHWWLQJ RSWLRQV
&RRNLQJ WLPH
(QG
([LW ZLWK
Press the
button to exit the Time-setting options.
0
3.
Confirm by pressing the
4.
The setting is applied. The appliance is in
end time is shown on the display. The cooking operation
starts at the right time. The cooking time counts down in the
display.
Changing the end time
The end time can be changed provided the appliance is in
standby. Press the
0
button. Press the
rotary selector to change the end time. Press the
exit the Time-setting options.
The cooking time has elapsed
A signal sounds. The appliance stops heating. The cooking
time "00:00:00" appears on the display. Press the
stop the signal.
Cancelling the end time
The end time can be cancelled provided the appliance is in
standby. Press the
0
button. Press the
rotary selector to turn back the end time until the current time
appears again. Press the
options. The selected cooking time starts counting down
straight away.
time-setting options are
0
n
button.
standby ... . The
0
X
button and turn the
0
0
X
button and use the
button to exit the Time-setting
0
button to
button to