Bdcom S2518PB Donanım Kurulum Kılavuzu - Sayfa 16

Anahtar Bdcom S2518PB için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Bdcom S2518PB 19 sayfaları.

Chapter 4

Caution:

This section describes how to open the cover of the switch, required tools and operation

methods.

Caution:

When the power cable still connects the power supply, do not touch it.

To uninstall the chassis, you need some tools which the standard configuration of

S2518PB does not provide. These tools are:

Crossed screwdriver



Static armguard



Perform the following steps to open the cover of the switch:

(1)

(2)

(3)

Note:

The chassis comprises of two parts: cover and bottom.

(4)

S2518PB Maintenance

Before opening the chassis, make sure that you have released the static you

carried and then turn off the power on-off of S2518PB. Before operating any

step in Appendix B, read the section "Safety Advice".

Before performing operations beside the power supply or on the chassis,

turn off the power on-off and plug out the power cable.

Cut off the power of the switch.

Plug out all cables connected the back of the switch.

Take out the bolt from the chassis with the screwdriver.

Open the cover by removing the three screws on both sides of the machine

and holding two sides of the cover towards the direction of the arrow key

shown in the following figure:

S2518PB Hardware Installation Manual

- 14 -