Bosch hbe5451uc Kurulum Kılavuzu - Sayfa 7
Fırın Bosch hbe5451uc için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Bosch hbe5451uc 27 sayfaları.
Ayrıca Bosch hbe5451uc için: Kurulum Kılavuzu (28 sayfalar)
Sayfayı Yazdır
Flush installation
Top View
...........................................................................
I
',15_ 6"(23),5_6"(23)i
!reveal
reveal!
i,,_eats
cleats,:' I
(24) _-
_]Z
FI-'
.__
2115,4e"____
/
(557)
I---23%
(603) ---,-I
f
,,
2215_6"
(584)
flush inset
depth
()--mm
Side View
15/16"
* Flush installation
requires a s/10 (5 mm) high x
21W16" (557 mm) wide x 221/16" (560 mm) deep
baseplate underneath
the unit body.
2215_ 6'w-_
(584)
()=mm
Install Appliance
Electrical
Installation
All model ovens on the front cover are dual rated,
designed to be connected
to either 208/240V
AC, 50/
60 Hz, 4 wire, single-phase
power supply.
Model
I
Dedicated circuit required
HBE5451UC
I
20 AMP
The electrical supply should be a 4-wire single-phase AC.
Install a suitable conduit box (not furnished). An
appropriately-sized,
UL-listed conduit connector
must be
used to correctly attach the conduit to the junction box.
NOTICE:
Local Codes may vary; installation, electrical
connections
and grounding
must comply with all
applicable
local codes.
If local codes permit grounding through the electrical
supply neutral, connect both the white neutral wire and
the bare ground wire from the oven to the white neutral
electrical supply wire.
• ,
CAUTION
o The appliance
must be disconnected
from the
power supply during all installation work.
o The appliance
must only be connected
with the
power cable provided.
o Protection against contact must be ensured by
the installation.
Electrical Connection
The four-wire connection
is preferred, but where local
codes permit, the three wire connection
is also
acceptable.
• ,
WARNING
When connected
to a 4 or 5-wire, 120/208-Volt
3-
phase power supply; the phase C conductor
is not
required for the operation of the appliance.