Draytek VigorSwitch P1282 Hızlı Başlangıç Kılavuzu - Sayfa 11
Anahtar Draytek VigorSwitch P1282 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Draytek VigorSwitch P1282 14 sayfaları. Web smart gigabit switch
Ayrıca Draytek VigorSwitch P1282 için: Hızlı Başlangıç Kılavuzu (10 sayfalar), Hızlı Başlangıç Kılavuzu (9 sayfalar)
Sayfayı Yazdır
hardware installation
This section will guide you to install the switch through a hardware connection and configure
the switch settings through the web browser.
Before you start configuring the switch, you need to connect your
devices correctly.
Use
Power the device to this switch and get a 48V power supply through
Cat. Cable 5e.
3.1 Network connection
- Use a cat. 5e twisted pair cable to connect a PoE device to port (1~24) of this
switch.
The switch will supply power to the PoE device through the twisted pair cable. have
-
Please note that the power device must comply with IEEE 802.3af/at.
-
Other PCs, servers, and network devices can be connected to the
-
switch using a standard "straight" twisted pair cable.
(Take VigorSwitch P1282 as an example)
4