Electrolux EW 1062 S Kurulum ve Kullanım Kılavuzu - Sayfa 22

Yıkayıcı Electrolux EW 1062 S için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Electrolux EW 1062 S 22 sayfaları. Front-loading washing machine
Ayrıca Electrolux EW 1062 S için: Kurulum ve Kullanım Kılavuzu (23 sayfalar)

Electrolux EW 1062 S Kurulum ve Kullanım Kılavuzu
Problem

• The door will not open:

• Spinning starts late or the
machine does not spin:
• The machine makes an
unusual noise:
• No water is visible in the
drum:
• Unsatisfactory washing
results:
• Detergent residue is left after
the wash cycle:
• Foam remains after the last
rinse:
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service Centre
will require this information.
22
Possible cause
• The programme is still running.
• The door lock has not been released.
The door can be opened when the door locked
light is off.
• There is water in the drum.
• The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several times
before the unbalance disappears and normal
spinning can resume. If, after 10 minutes, the
laundry is still not evenly distributed in the drum, the
machine will not spin. In this case, redistribute the
load manually and reselect the spin programme.
• The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a
softer start and more even distribution of the
laundry in the drum when spinning, as well as
increased stability of the machine.
• Machines based on modern technology operate
very economically using very little water without
affecting performance.
• Too little detergent or unsuitable detergent has
been used.
• Stubborn stains have not been treated prior to
washing.
• The correct temperature was not selected.
• Excessive laundry load.
• This is most problaby due to non soluble
components contained in modern detergents. It is
not a sign of inadequate rinsing.
Brush or shake the garments and, if necessary,
wash them again.
• Modern detergents can produce foam even after
rinsing, but this will not affect the quality of the
wash.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042