Electrolux EW 1067 F Talimat Kitapçığı - Sayfa 18

Yıkayıcı Electrolux EW 1067 F için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Electrolux EW 1067 F 25 sayfaları. Electrolux washing machines

Sayfayı Yazdır

132997230•gb

19-04-2001

Operating sequence

Before washing your first load of laundry, we

recommend that you run a cotton cycle at 60°C, with

the machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

P0004

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked

3. Measure out the additives

If required, pour fabric softener into the compartment

marked

, without exceeding the «MAX» mark.

P0876

15:24

Pagina 18

P0877

4. Switch the machine on

To switch the machine on, press the ON/OFF button

: the mains-on light comes on.

If the programme selector dial is on the RESET O

position, three flashing dashes will be displayed. If

the programme selector dial is positioned on a wash

programme, a flashing zero will be displayed.

5. Select the desired programme

Turn the programme selector dial to the desired

position: the lights corresponding to the different

phases making up the selected programme light on.

The duration of the programme appears on the

display.

6. Select the spin speed or option

Depress the spin speed button

required speed or option

comes on.

1200

900

700

500

---

Prewash

Main wash

Rinses

Stop with water in the tub

Drain

Spin

Clogged filter

End

to choose the

: the corresponding light