Draytek VigorSwitch V1281 Hızlı Başlangıç Kılavuzu - Sayfa 14

Anahtar Draytek VigorSwitch V1281 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Draytek VigorSwitch V1281 20 sayfaları.

If you can't use the app and your router acts as your DHCP server, you can check the

router's 'DHCP table' to locate the switch (the VigorSwitch's MAC address will start

00-1D-AA...). The DHCP table is typically under a diagnostics menu on most routers.

If you are using a DrayTek router, you can also use the "External Device" menu to

discover and show the switch's IP address.

If your V1281 switch cannot get an address by DHCP, it will assume a

default address of 192.168.1.224. A PC connected directly to the

switch, with a fixed/static IP address in the same subnet (e.g.

192.168.1.10) will be able to access the switch's GUI in order to set

its IP address manually.

Access the VigorSwitch's Web Interface (GUI)

Once you know the switch's IP address you can access its web interface. Open

your browser (Firefox, Edge, Chrome, Safari etc.) and in the address bar, type

https://192.168.1.50 (replace that address with your actual address located

earlier). Note that we prefix with https to force a TLS encrypted connection.

We recommend always using encryption to access network devices.

Note: As you are requesting an https (TLS encrypted) connection, your browser

will try to validate the certificate against your switch's dynamic LAN IP address,

which will fail. If you've entered the correct address for the switch, you can

proceed past this message (which will vary depending on your browser). You may

need to press 'Advanced' to get to the 'continue' link and then permit access or

add an exception. If you can't use https, use http in the address bar instead.

The Login screen should now appear for your VigorSwitch. The default admin

username is 'admin' and the password is also 'admin'. You should change this

immediately (you will be invited to do so by the switch). Remember your new

admin password – there is no way to recover it or access the switch otherwise.