Bosch HBG5786 0 Series Kullanım Kılavuzu - Sayfa 19

Fırın Bosch HBG5786 0 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bosch HBG5786 0 Series 48 sayfaları.

Sayfayı Yazdır

QBasic settings

T here are various settings available to you in order to

B a s i c s e t t i n g s

help use your appliance effectively and simply. You can

change these settings as required.

List of basic settings

Depending on the features of your appliance, not all

basic settings will be available.

Basic setting

™‹‚ Audible signal duration upon

completion of a cooking time

or timer duration

™‹ƒ Amount of time until a setting

is applied

™‹„ Button tone that sounds when

a button is touched

™‹... Brightness of the display illu-

mination

™‹† Display time of day

™‹‡ Enable childproof lock activa-

tion?

™‹ˆ Interior lighting on when

appliance in operation?

™‹‰ Cooling fan run-on time

™‹Š Telescopic rails retrofitted?** ‹ = no* (for rails and single

™‚‹ Sabbath mode available?

™‚ƒ Reset all values to factory set-

tings?

* Factory setting (factory settings may vary depending on the appli-

ance model)

** Not available for all appliance types.

--------

Options

‚ = approx. 10 seconds

ƒ = approx. 30 seconds*

„ = approx. 2 minutes

‚ = approx. 3 seconds*

ƒ = approx. 6 seconds

„ = approx. 10 seconds

‹ = off

‚ = on*

‚ = dark

ƒ = medium*

„ = bright

‹ = hide the time

‚ = display the time*

‹ = no

‚ = yes*

ƒ = yes, with locked door**

‹ = no

‚ = yes*

‚ = short

ƒ = medium*

„ = long

... = extra long

pull-out system)

‚ = yes (for double and triple

pull-out systems)

‹ = no*

‚ = yes

‹ = no*

‚ = yes

Changing the basic settings

The function selector must be set to the "Off" position.

Press and hold the v button for approximately

4 seconds.

The first basic setting will appear on the display,

e.g. ™‹‚ ‚.

Turn the temperature selector to change the setting

as required.

Use the @ button to navigate to the next basic

setting.

Using the A or @ button, continue going through all

the basic settings as described above, changing the

settings if necessary using the temperature selector.

When you have finished, press and hold the

v button again for approximately 4 seconds to

confirm the settings.

All basic settings have now been applied.

You can change the basic settings again at any time.

Your changes to the basic settings will be

Note:

retained even after a power failure.