AirStage UTY-DTGYZ1 Kurulum Kılavuzu - Sayfa 4

Kontrolör AirStage UTY-DTGYZ1 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. AirStage UTY-DTGYZ1 9 sayfaları. Touch panel controller

Sayfayı Yazdır
5. 1.

Installation preparations

▪
Make ready the touch panel controller.
Side view
(1)
Remove the
 screw at 2 places at the top of both sides of the
touch panel controller. (Fig. 1)
(2)
Separate the front cover part and the rear cover part.
(3)
Hook your fi nger at the notched part indicated by arrow
the rear cover and open in the direction of arrow  . (Fig. 1)
(4)
Connect the front cover and rear cover and grasp and pull out the
connector of the  connection cable. (Fig. 1)
Fig.
1
 Screw
Front cover
*
During work, be amply
careful so that the front
cover does not fall off.
 Connection cable harness
(5)
Remove the installation plate
the inside of the rear cover. (Fig. 2)
Fig.
2
 Fixing screw
 Wiring
hole cover
*
The fi xing screws are used at installation. Do not lose
them.
(6)
Installation plate dimensional drawing
Separate the installation plate from the rear cover. (Fig. 3)
Remove the screw at 2 places of the  wiring hole and remove
the wiring hole cover. (Fig. 2)
En-3
Front view
Side view
Rear cover
 Screw
 fi xing screws at 2 places from
Rear cover (Inside)
 Fixing screw
 Wiring
hole cover
Fig.
3
 and
Fig.
4
9(3/8)
*
Refer to the dimensional drawing and verify the consistency of
the hole positions of the installation screws of the switch box to be
installed in advance. (Fig. 4)
5. 2.

Terminal names

▪
Terminal names: Names of connection terminals inside the rear
cover
Power supply cable
through hole
Power supply cable
connection terminal
POWER SUPPLY
L
N
Power supply
terminal
1Ø 100-240V
Screw Size : M4
Rear cover outline
123 (4-13/16)
95 (3-3/4)
95 (3-3/4)
72 (2-13/16) 72 (2-13/16)
46 (1-13/16) 46 (1-13/16)
211 (8-5/16)
Installation plate
9(3/8)
TRANSMISSION
[TM201]
X1 X2
VRF ( L
)
W
ON
ORKS
Transmission
terminal
Screw Size : M3
Earth (Ground)
Earth (Ground)
terminal
terminal
Screw Size : M4
Screw Size : M3
Unit: mm (in)
Anchorposition
Transmission cable
connection terminals
[TM201]
Transmission cable
through hole
EXTERNAL INPUT
CH1
CH2
K1 K2 K1 K2
External input
terminal
Screw Size : M3