Electrolux EW6FN428BC Kullanıcı Kılavuzu - Sayfa 25
Yıkayıcı Electrolux EW6FN428BC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Electrolux EW6FN428BC 40 sayfaları.
Sayfayı Yazdır
If the SensiCare System has
completed and the water
filling has already started,
the new programme starts
without repeating the
SensiCare System. The
water and the detergent are
not drained out in order to
avoid waste.
There is also an alternative way of
cancelling:
1. Rotate the selector knob to the "Reset"
position
.
2. Wait for 1 second. The display shows
.
Now, you can set a new washing
programme.
12.11 Opening the door -
Adding garments
If the temperature and level
of the water in the drum are
too high and/or the drum is
still rotating you should not
open the door.
While a programme or the delay start
operates, the appliance door is locked.
The display shows the indicator
1. Touch the Start/Pauza
The indicator
2. Wait until the door lock indicator
stops flashing and goes off. Open the
appliance door. If necessary, add or
remove the items. Close the door
and touch the Start/Pauza
button. The programme or the delay
start continues.
.
button.
starts flashing.
12.12 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active). The display shows
The indicator of the Start/Pauza
button goes off.
The door unlocks and the indicator
goes off.
1. Press button Zap./Vyp.
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
shows the end of the
previous programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
12.13 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
• The time area shows
display shows the door locked
• The drum still turns at regular
intervals to prevent creases in the
laundry.
• The door stays locked.
• You must drain the water to open the
door:
1. If necessary, touch the Odstřeď.
button to decrease the spin speed
proposed by the appliance.
2. Press the Start/Pauza
ENGLISH
25
to
and the
.
button: