Electrolux EW6S5438G6 Kullanıcı Kılavuzu - Sayfa 9

Yıkayıcı Electrolux EW6S5438G6 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Electrolux EW6S5438G6 40 sayfaları.

6. Put the appliance back into an

upright position. Remove the power

supply cable and the drain hose from

the hose holder.

WARNING!

It is possible to see

water flowing from the

drain hose. This is

because the washing

machine has been

tested at the factory.

7. Remove the four transit bolts and pull

out the plastic spacers.

8. Put the plastic caps, that you find in

the user manual bag, in the holes.

5.2 Information for installation

1. Positioning and levelling

Correctly adjusting the appliance so that

it is level prevents vibration, noise and

movement of the appliance when in

operation.

1. Install the appliance on a flat hard

floor. The appliance must be levelled and

stable. Make sure that the appliance

does not touch the wall or other units and

there is air circulation below the

appliance.

2. Loosen or tighten the feet to adjust the

level. All feet must rest firmly on the floor.

We recommend that you

keep the packaging and

the transit bolts for any

transport of the appliance.

WARNING!

Do not put cardboard, wood

or equivalent materials

below the appliance feet to

adjust the level.

ENGLISH