Draytek Vigor VigorAccess Hızlı Başlangıç Kılavuzu - Sayfa 4

Ağ Donanımı Draytek Vigor VigorAccess için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Draytek Vigor VigorAccess 17 sayfaları. Draytek vigor vigoraccess: quick start
Ayrıca Draytek Vigor VigorAccess için: Teknik Özellikler (2 sayfalar)

Draytek Vigor VigorAccess Hızlı Başlangıç Kılavuzu
For Master Device
Connect to a PC through
CONSOLE port. It is useful for
controlling the device locally.
C
o
n
f
i
g
u
r
a
t
C
o
n
f
i
g
u
r
a
t

How to Login with a Terminal Emulator Software

For Master Device
1. The default setting is "baud rate 9600, no
parity, and 8 bit with 1 stop bit (N,8,1)".
2. Use any terminal emulator software for
executing commands.
Username – admin
Password – 1234
How to Login to DSL Module for Managing DSLAM
Both master and slave devices have DSL module installed. The DSL module plays the core role for
aggregating all ATM traffic coming from DSL ports to the uplink Ethernet interface, and vice versa.
Through the master controller in the master device, administrator can login to the DSL module inside
master or slave device for managing DSLAM.
To DSL Module in Master Device
There are two ways provided:
-
Admin>dsl -c
-
Admin>dsl -m

How to Plug and Play Slave Device

By default, ports G1 to G6 on master device are disabled. If the slave connects to the master device,
please refer to the picture below to ensure the connection is well.
2
Connect to a PC through MGN
port. It is useful for controlling
the master device remotely.
i
o
n
b
y
U
s
i
n
g
T
e
r
m
i
o
n
b
y
U
s
i
n
g
T
e
r
m
(press <Ctrl-Z> to return)
('exit' to return)
i
n
a
l
E
m
u
l
a
t
o
r
S
o
i
n
a
l
E
m
u
l
a
t
o
r
S
o
For Slave Device
1. The default setting is "baud rate 9600, no parity,
and 8 bit with 1 stop bit (N,8,1)".
2. Use any terminal emulator software for executing
commands.
Username – admin;
No Password
To DSL Module in Slave Device
Only one slave device can be logged in at one time.
-
Admin>dsl -s n
For Slave Device
Connect to a PC through
CONSOLE port. It is useful for
controlling the device locally.
f
t
w
a
r
e
f
t
w
a
r
e
(type 'exit' to return),
n is "1" to "6" indicating the port
the slave device connects to
Quick Start Guide for VigorAccess