Draytek Vigor2927 Series Hızlı Başlangıç Kılavuzu - Sayfa 2
Ağ Donanımı Draytek Vigor2927 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Draytek Vigor2927 Series 3 sayfaları. Dual-wan security router
Ayrıca Draytek Vigor2927 Series için: Hızlı Başlangıç Kılavuzu (19 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (18 sayfalar)
Sayfayı Yazdır
EU Declaration of Conformity
Hereby, DrayTek Corporation declares that the equipment type Vigor2927 is in compliance with The Electromagnetic Compatibility Regulations 2016
(SI 2016 No.1091), The Electrical Equipment (Safety) Regulations 2016 (SI 2016 No.1101), and The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No. 3032).
The full text of the UKCA Declaration of Conformity is available at the following internet address:
https://fw.draytek.com.tw/Vigor2927/Document/CE/
Product name:
Dual-WAN Security Firewall
Model number:
Vigor2927
Manufacturer:
DrayTek Corp.
Address:
No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan
EU Declaration of Conformity
Hereby, DrayTek Corporation declares that the equipment type Vigor2927 is in compliance with EU EMC Directive 2014/30/EU, Low Voltage Directive
2014/35/EU and RoHS 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the following internet address:
https://fw.draytek.com.tw/Vigor2927/Document/CE/
Product name:
Dual-WAN Security Firewall
Model number:
Vigor2927
Manufacturer:
DrayTek Corp.
Address:
No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan
H
a
r
d
w
a
r
e
I
n
s
H
a
r
d
w
a
r
e
I
n
s
1.
Connect the cable Modem/DSL
Modem/Media Converter to any
WAN port of router with Ethernet
cable (RJ-45).
2.
Connect one end of an Ethernet
cable (RJ-45) to one of the LAN
ports of the router and the other
end of the cable (RJ-45) into the
Ethernet port on your computer.
3.
Connect one end of the power
adapter to the router's power
port on the rear panel, and the
other side into a wall outlet.
4.
Power on the device by pressing down the power switch on the rear panel.
5.
The system starts to initiate. After completing the system test, the ACT LED will
light up and start blinking.
t
a
l
l
a
t
i
o
n
t
a
l
l
a
t
i
o
n