Alen BreatheSmart Kullanıcı Kılavuzu - Sayfa 6

Hava Temizleyici Alen BreatheSmart için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alen BreatheSmart 11 sayfaları. Hepa air purifier
Ayrıca Alen BreatheSmart için: Kullanıcı Kılavuzu (7 sayfalar)

Alen BreatheSmart Kullanıcı Kılavuzu

KnoW YoUR AIR PURIfIER

When using the air purifier for the first time in a room, we recommend that you use a higher fan
speed like speed three (3) or Turbo (T), for at least two hours in order to clean the room's air
initially. Then, we recommend that the air purifier run continuously on speed two (2) or three (3)
or be set on automatic mode.
features
HEPA type filtration captures dust, allergens and airborne pollutants
Ionizer charges smaller particles, causing them to clump together for improved filtration
4 fan speeds with a 4, 8, & 12 hour timer to control air circulation
Automatic mode sets speed for optimal performance
Filter change indicator light keeps replacements on schedule
Simple and intuitive touch button controls
Auto-off safety feature when front cover is removed
Filter designed for easy replacement
CAre & MAinTenAnCe
Turn The Lights off/on
To turn the lights off on your unit, press the
will not turn off. Press any button to turn the lights back on, or press the
time to turn the unit off completely.

replacing The filter

The Filter Life Indicator has 3 lights: Green, Yellow and Red. The Green light will be illuminated
for most of the life of the filter. Yellow light will come on shortly before your filter should be
replaced. This is the ideal time to order a new filter. You may order a new filter at www.alencorp.
com/filters or by calling 1-800-630-2396. The Red light will be illuminated when it is time to
replace the filter.
The filters used in Alen HEPA Air Purifiers are not designed to be washed, cleaned or otherwise
reused. Over time, the filters become overloaded with particles, decreasing their filtration per-
formance. We recommend regular filter replacements to extend the life of your air purifier and
maximize performance.
The black foam layer of the filter, known as the Pre-Filter, captures large dust and hair. This
layer is held on with Velcro
maintain efficient operation of the unit.
Reset the filter Life Indicator
After replacing the filter, hold the FILTER LIFE button down for 5 seconds. The Red light will be
reset to Green.
. Once removed, the Alen Pre-Filter can be washed or vacuumed to
®
www.AlenCorp.com 1-800-630-2396
Power Button. The lights will go out but the unit
Power Button a 2nd
7