Drazice OKC 250 NTRR Kullanım ve Kurulum Kılavuzu - Sayfa 14
Su Isıtıcı Drazice OKC 250 NTRR için çevrimiçi göz atın veya pdf Kullanım ve Kurulum Kılavuzu indirin. Drazice OKC 250 NTRR 19 sayfaları. Water heaters for solar systems
Ayrıca Drazice OKC 250 NTRR için: Kullanım ve Kurulum Kılavuzu (17 sayfalar)
Sayfayı Yazdır
2.2.2 EXAMPLE OF CONNECTING A HEATER WITH SOLAR COLLECTORS AND A GAS
BOILER
Connecting a heater to a boiler heating circuit:
The heater is placed on the ground, next to the heating source, or in its vicinity. The heating circuit is
connected to marked inputs and outputs of the heater exchanger; the deaeration valve is mounted in the
highest place. It is necessary to install a filter into the circuit in order to protect the pumps, the three-way
valve, and backflow flaps, and the exchanger from sedimentation. It is recommended to flush the heating
circuit before the assembly. All wiring connections must be properly insulated from heat.
If the system works with priority heating of HSW using a three-way valve, always follow the
installation instructions of the three-way valve´s manufacturer.
Figure 5
- 14 -