Bosch Series 4 Kullanım Kılavuzu - Sayfa 6

Fırın Bosch Series 4 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bosch Series 4 24 sayfaları. Free standing cooker
Ayrıca Bosch Series 4 için: Kullanım Kılavuzu (44 sayfalar), Kurulum ve Kullanım Kılavuzu için Talimatlar (16 sayfalar), Kurulum ve Kullanım Kılavuzu için Talimatlar (16 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (24 sayfalar), Kullanım Kılavuzu (10 sayfalar), Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (20 sayfalar), Kullanım Kılavuzu (32 sayfalar), Kurulum Talimatları Kılavuzu (12 sayfalar), Manuel (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Kullanım Kılavuzu (50 sayfalar), Kullanım Bilgileri (24 sayfalar), Kullanım Kılavuzu (48 sayfalar), Kullanım Bilgileri (32 sayfalar), Kullanım Bilgileri (32 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Kullanım Bilgileri (32 sayfalar), Kullanım Kılavuzu (24 sayfalar), Kullanım Kılavuzu (27 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (40 sayfalar), Kullanım Bilgileri (32 sayfalar), Kullanım Kılavuzu (36 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Kullanım Kılavuzu (47 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (28 sayfalar)

Sayfayı Yazdır
Bosch Series 4 Kullanım Kılavuzu

Installation and connection

en
:
Warning – Risk of injury!
Scratched glass in the appliance door may
■
develop into a crack. Do not use a glass
scraper, sharp or abrasive cleaning aids or
detergents.
Unsuitable ovenware may crack. Porcelain
Risk of injury!
■
or ceramic ovenware can have small
perforations in the handles or lids. These
perforations conceal a cavity below. Any
moisture that penetrates this cavity could
cause the ovenware to crack. Only use
microwave-safe ovenware.
If using the appliance in microwave mode
Risk of injury!
■
only, placing cookware and containers
made of metal or featuring metal detailing
inside the appliance may cause sparks
when the appliance is operating. This may
damage the appliance. Never use metal
containers when using the appliance in
microwave mode only.
Using unsuitable cookware may result in
Risk of injury!
■
damage. For microwave combination mode,
always use cookware made from suitable
materials that can also withstand the
temperatures used for hot air and grilling
modes.
The glass turntable may splinter.Never allow
Risk of injury!
■
hard objects to strike the turntable.
Cracks or chinks in the glass turntable are
Risk of injury!
■
dangerous. Handle the turntable with care.
:
Warning – Risk of electric shock!
The appliance is a high-voltage appliance.
Never remove the casing.
:
Warning – Risk of serious damage to
health!
The surface of the appliance may become
■
damaged if it is not cleaned properly.
Microwave energy may escape. Clean the
appliance on a regular basis, and remove
any food residue immediately. Always keep
the cooking compartment, door seal, door
and door stop clean. ~ "Cleaning"
on page 15
Risk of serious damage to health!
6
Microwave energy may escape if the
■
cooking compartment door or the door seal
is damaged. Never use the appliance if the
cooking compartment door or the door seal
is damaged. Contact the after-sales service.
Microwave energy will escape from
Risk of serious damage to health!
■
appliances that do not have any casing.
Never remove the casing. For any
maintenance or repair work, contact the
after-sales service.
5Installation and connection
T his appliance is designed for domestic use only.
I n s t a l l a t i o n a n d c o n n e c t i o n
This appliance is designed to be fully integrated into
kitchen units.
Please follow the dedicated installation instructions.
The appliance is ready to be plugged in and may only
be connected to a Schuko socket that has been
correctly installed. The circuit breaker must have a
rating of 10 A (L- or B-type circuit breaker).The mains
voltage must correspond to the voltage specified on the
rating plate.
Only a qualified electrician may install the socket or
replace the power cable.If the plug is no longer
accessible once the appliance has been installed, an
all-pole isolating switch with a contact gap of at least 3
mm must be provided for the wiring.
Do not use multi-socket adaptors, power strips or
extension leads. Overloading causes a risk of fire.