DrBrowns AC045-INTL Kullanım Kılavuzu - Sayfa 4

Laboratuvar Ekipmanları DrBrowns AC045-INTL için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DrBrowns AC045-INTL 14 sayfaları. Deluxe bottle sterilizer

PARTS
A. Top cover
B. Main cover
C. Upper Tray
D. Heating Plate (inside)
E. ON/OFF Button
F. Cycle Start Button
TO USE
1
Before running this appliance, it is important that all bottles, bottle parts
and/or other accessories are clean. They must be washed, rinsed and empty.
2
Position the appliance on a flat surface and out of reach of children where it
cannot be knocked or moved during operation. Remove the tray.
3
Remove the measuring cup and tongs from the unit.
4
Fill the measuring cup to the FILL LINE (3 oz/80 mL) with NON-MINERAL
BOTTLED WATER and pour the water ONTO THE HEATING PLATE.
Note: For best performance, use recommended water and descale monthly.
Water with minerals may shorten the life of this appliance.
CAUTION: DO NOT EXCEED the recommended amount of water.
If it is necessary to drain water from the base, always POUR AWAY
FROM YOU.
5
Place the removable tray (part H) in the sterilizer heating chamber. Arrange the
bottles and other parts in the tray.
Note: If using Dr. Brown's bottles and parts, see Figure A through Figure G
on page 5 for suggested layout options. Both narrow and wide-neck bottles
are shown.
6
Close the main cover (part B) and arrange the parts on the upper tray (part C) as
shown in Figure C and Figure G.
Note: This appliance can sterilize any item that can withstand boiling water,
such as pacifiers/soothers, teethers, toys and utensils.
7
Close top cover (part A).
8
Plug the power cord into an electrical outlet and press the On Button (E).
Note: When the sterilizer is turned on, you will notice that cycle indicator lights (G)
will illuminate with a cycle of RED-BLUE-GREEN colors. After this initial cycle-through
of colors, the green symbol will remain lit indicating "READY" mode.
3
G. Cycle Indicator
Lights
H. Removable Tray
I. Tongs
J. Measuring Cup
A
B
G
F
E
J
I
C
D
H