Advanced Illumination DCS-800E Kullanıcı Kılavuzu - Sayfa 4
Kontrolör Advanced Illumination DCS-800E için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Advanced Illumination DCS-800E 12 sayfaları. Quad controller
Sayfayı YazdırIntroduction
Challenging machine vision inspection requirements often call for more sophisticated imaging
techniques, like those employed with Photometric Stereo. The DCS-400E (Quad Controller,
4-channel) and DCS-800E (Quad X2, 8-channel) lighting controllers provide multi-channel
lighting and sequenced, multi-image captures that produce compelling inspection results when
processed with photometric stereo imaging software libraries.
A typical photometric stereo imaging application uses two or more channels of lighting to
sequentially illuminate the target from different directions. The DCS-400E and DCS-800E allow
up to 4 or 8 potential channels, respectively, which can be used in any combination of quadrants
or colors, or even different light types. To meet the inspection requirements, these combinations
can be mixed and matched to create the ultimate multi-dimensional lighting effects.
The Quad Controllers allow independent brightness, pulse width, and pulse delay across all
channels, affording maximum flexibility. Configurable output signals are available to provide
frame start and stop control over the camera, as well as the ability to save and load channel
recipes on the fly.
Hardware & Setup
Hardware Overview
The following hardware are used in the examples featured in this user guide.
DF198 Dark Field Ring Light
DF198-WHIQ1
Page 2
DCS-400E
Quad Controller
USB 3 Camera
Standardized Camera Interface
MIL Compatible