Alen MPF-12CR Kullanıcı El Kitabı - Sayfa 9

Taşınabilir klima Alen MPF-12CR için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Alen MPF-12CR 17 sayfaları. Portable air conditioner
Ayrıca Alen MPF-12CR için: Kullanıcı El Kitabı (15 sayfalar)

Sayfayı Yazdır

Window Kit Installation

Your window kit has been designed to fit most standard

vertical and horizontal opening window It

may be necessary for you to modify some aspects of

the installation procedures for certain window types.

Please refer to Fig.11 & 11a for the minimum and maximum

window openings.

Drain Tank Safety Feature

This unit is equipped with an internal water tank, two full-safe

switch mechanisms, one is used to control the water pump

drainage, the other is used to monitor the water level inside

the internal water tank. When the water level reaches a

predetermined level, the full-safe switch mechanism is

activated. The digital display shows P1 and the water full

indicator light illuminates. Carefully move the unit outside,

remove the rubber blockage from the back drainage hole

and drain the water off. The unit will continue operating

properly.

MAINTENANCE

1) BE SURE TO UNPLUG THE UNIT BEFORE CLEANING.

2) DO NOT USE GASOLINE, THINNER OR OTHER CHEMICALS TO CLEAN THE UNIT.

3) DO NOT WASH THE UNIT DIRECTLY UNDER A TAP OR WITH A HOSE DUE TO ELECTRICAL

HAZARDS.

4) IF THE POWER CORD IS DAMAGED, IT SHOULD BE REPAIRED BY THE MANUFACTURER OR ITS

AUTHORIZED REPAIR AGENCY.

IMPORTANT:

1 AIR FILTER

Clean the air filter at least once every two weeks to

prevent interior fan damage due to an accumulation of dust.

Removal

Pull out the filter cover and remove the air filter from the

filter cover.

Cleaning

Wash the air filter by immersing it gently in warm water

with a neutral detergent. Rinse the filter and let it dry.

Mounting

Attach the air filter to the filter cover using the attachment

hooks on the inner surface of the cover. Put the filter cover

back to the unit.

2 UNIT ENCLOSURE

Use a damp lint-free cloth to clean the unit enclosure.

Dry with a dry clean cloth.

Horizontal

window

Window Slider Kit

Minimum:67.5cm(2.22ft).

Maxmum:123cm(4.04ft).

Fig.11

Horizontal

window

Window Slider Kit

Minimum:67.5cm(2.22ft).

Maxmum:123cm(4.04ft).

Fig.11a

Fig.12