Bosch 1 600 A02 8M2 Orijinal Talimat Kılavuzu - Sayfa 4

Elektrikli Alet Bosch 1 600 A02 8M2 için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. Bosch 1 600 A02 8M2 20 sayfaları.

Sayfayı Yazdır

4 | English

English

Safety Instructions

Read all safety and general instructions en-

closed with the auto-feed attachment and

the power tool being used. Failure to observe

the safety and general instructions may result

in electric shock, fire and/or serious injury.

Keep all the safety and general instructions for future

reference.

Pull the plug out of the socket and/or remove the re-

chargeable battery from the power tool and, if neces-

sary, set the rotational direction switch to the middle

position before making any adjustments to the power

tool, changing accessories or transporting the power

tool. Accidents can occur when power tools are started

unintentionally.

While working, never reach into the auto-feed attach-

ment or near the point where screws are being inser-

ted. There is a risk of injury from crushing or sharp-edged

screws.

Use only suitable screw belts according to the Tech-

nical Data. Using different screws can damage the auto-

feed attachment.

Do not point the power tool at yourself or anyone else

with the auto-feed attachment fitted.

Product Description and

Specifications

Intended Use

The auto-feed attachment is intended for efficiently driving

screws into drywall boards in wood and metal substructures.

The auto-feed attachment may only be used with Bosch dry-

wall screwdrivers.

Product Features

The numbering of the components shown refers to the illus-

trations on the graphics pages at the beginning of the

manual.

(1) Screwdriver bit with securing ring

(2) Tool holder

(3) Depth stop

(4) Screw belt

(5) Pin for screw length setting

(6) Thumbwheel for screw-in depth

(7) Scale for screw-in depth

a) Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

1 609 92A 6YK | (01.09.2021)

Technical Data

Auto-feed attachment

Article number

Screw size

– Screw length

– Max. shank diameter

– Max. screw head diameter

Weight according to

EPTA-Procedure 01:2014

Assembly

Pull the plug out of the socket before carrying out any

work on the power tool.

Remove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

Fitting the Auto-feed Attachment

Pull the standard depth stop off the drywall screwdriver if

one is fitted.

Pull the bit holder off towards you if one is fitted. An auxiliary

tool can be used to remove the bit or bit holder.

Insert a long screwdriver bit (1) into the tool holder (2) of

the drywall screwdriver.

Slide the auto-feed attachment over the screwdriver bit (1)

and onto the motor housing as far as it will go.

You can fit the auto-feed attachment offset in 45° incre-

ments. The auto-feed attachment cannot be rotated once it

has been fitted on the drywall screwdriver.

Inserting the Screw Belt (see figure A)

Only guide the screw belt (4) when the power tool is

switched off.

Slide the screw belt (4) through the belt guide until the first

screw sits one notch in front of the centre of the depth

stop (3).

Operation

Adjusting the Screw Length (see figure B)

The auto-feed attachment must be adjusted to the screw

length you are using. Press the pin (5). Slide the depth

stop (3) until the pin is moved to the starting position by the

spring force.

Adjusting the Screw-in Depth (see figure C)

Turning the thumbwheel (6) downwards increases the

screw-in depth; turning it upwards decreases the screw-in

depth. The selected screw-in depth is indicated by a symbol

on the scale (7).

GMA 55

1 600 A02 8M2

25−55

9.5

0.36

Bosch Power Tools