Anchor MegaVox PRO MEGA-6000 Kullanıcı El Kitabı - Sayfa 4
Konuşmacılar Anchor MegaVox PRO MEGA-6000 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Anchor MegaVox PRO MEGA-6000 8 sayfaları. Portable public address system
Ayrıca Anchor MegaVox PRO MEGA-6000 için: Katalog (2 sayfalar), Kullanıcı El Kitabı (4 sayfalar), Teknik Özellikler (1 sayfalar), Kullanıcı El Kitabı (16 sayfalar)
Sayfayı Yazdır
System Inspection & Inventory
Check unit carefully for damage which may have occurred during
transit. Each Anchor product is carefully inspected at the factory
and packed in a special carton for safe transport.
Inventory
• MegaVox Pro sound system
NOTE:
• Warranty registration card
All damage
claims must
All damage claims must be made with the freight carrier. Notify the
be made with
freight carrier immediately if you observe any damage to the
the freight
shipping carton or product. Repack the unit in the carton and await
carrier.
inspection by the carrier's claim agent. Notify your dealer of the
pending freight claim.
Returning Systems For Service or Repair
Should your unit require service, contact your dealer or the Anchor
IMPORTANT:
Save the
Audio Customer Service Department at (800) 262-4671 to obtain a
shipping
Return Authorization (RA) number. All shipments to Anchor Audio
carton and
must include an RA number and must be shipped prepaid. C.O.D.
packing
shipments will be refused and returned at your cost.
materials.
They were
Warranty Registration
specially
Please fill out the warranty card and return it with a copy of your
designed to
ship your unit
invoice to Anchor's Customer Service Department. This will
safely.
activate your limited six year warranty.
2
GETTING STARTED
Wireless Microphone Operation
NOTE:
Both the receiver and microphone must be set to the same channel.
When using a
1. If you are using a body-pack transmitter, insert the plug from
dual wireless
the mic into the jack marked MIC on the transmitter.
unit, make
sure each
2. Turn the transmitter power switch to ON.
microphone is
(The red LED will flash when the mic is turned on.
set to a
If the red LED stays on, the battery is low.)
different
3. Turn the MegaVox Pro power switch to ON.
channel
frequency.
4. The RX indicators will light (one indicator at a time lights)
when the wireless signal is being transmitted and received.
MEGA-6000U1 Only: The audio signal from the built-in wireless
receiver is fed to the MIC 1/Wireless input. Unplug any other mic
from the MIC 1/Wireless input when using the wireless system.
Replacing Transmitter Battery
CAUTION:
Handheld Transmitter:
Harmful
1. Unscrew battery compartment cover on lower end of mic.
feedback may
occur when
2. Install 2 fresh 'AA' alkaline batteries.
walking in
3. Replace the battery cover.
front of a
sound system
or speaker
with a
wireless
microphone.
Always point
mic away
Body-pack Transmitter:
from speakers.
1. Slide open battery cover on front of transmitter box.
2. Install 2 fresh 'AA' alkaline batteries.
3. Close the battery cover.
NOTE:
Transmitter
power switch
must be in the
OFF position
when
changing
batteries
WIRELESS OPERATION
Place batteries into slot
and slide forward
11