Anchor Megavox Pro MEGA-6000U1 Kullanıcı El Kitabı - Sayfa 12
Konuşmacılar Anchor Megavox Pro MEGA-6000U1 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Anchor Megavox Pro MEGA-6000U1 16 sayfaları. Anchor mega-6000u1: brochure
Ayrıca Anchor Megavox Pro MEGA-6000U1 için: Katalog (2 sayfalar), Kullanıcı El Kitabı (4 sayfalar), Teknik Özellikler (1 sayfalar), Teknik Özellikler (1 sayfalar), Kullanıcı El Kitabı (8 sayfalar)
Sayfayı Yazdır
Diversity Wireless by Anchor Audio
Anchor Audio UHF wireless is a 16 channel, diversity wireless
system that utilizes two independent antennae to receive signal. The
diversity feature means that the receiver will process the stronger of
the two antenna signals, effectively minimizing dropouts and
interference from other transmitting sources. The antennae are
mounted internally so there are no obstructions or risk of damage.
Receiver Channel Selection
Before you use your UHF wireless system, you will
NOTE:
need to select a wireless frequency channel. The
If you
wireless receiver is mounted inside the MegaVox Pro
experience
ongoing
and can be set to any of 16 available channels.
interference
with your
wireless
system, the
selected
frequency
may be
Transmitter Channel Selection
incompatible
Handheld Transmitter:
with other RF
systems in
your area.
Try a different
channel.
Body-pack Transmitter:
NOTE:
Be sure that
the MIC/LINE
switch is in
the "MIC"
position when
a mic is
plugged into
the TX.
10
1. Locate the Wireless Channel selector on the
back panel.
2. Using the supplied screwdriver, set the
frequency of the receiver to 1 thru 16.
1. Unscrew battery cover on
lower end of microphone.
2. Set the channel selection
dial to match the channel
setting on the receiver.
3. Replace the battery cover.
1. The channel selection dial
is located on the side of
the transmitter.
2. Set the channel selection
dial to match the channel
setting on the receiver.