Dream Catcher ME3000 Analog Electronics Lab 6 Manuel - Sayfa 19

Amplifikatör Dream Catcher ME3000 Analog Electronics Lab 6 için çevrimiçi göz atın veya pdf Manuel indirin. Dream Catcher ME3000 Analog Electronics Lab 6 19 sayfaları. Rf class a tuned amplifiers

Sayfayı Yazdır

______________________________________________________________________

8. X Cursors places two cursors on the X-Axis of the waveforms to measure the time

difference between the two cursors (X2 minus X1). Delta X denotes the time difference.

9. Y Cursors places two cursors on the Y-Axis of the waveforms to measure the voltage

difference between the two cursors (Y2 minus Y1). Delta Y denotes the voltage difference.

AutoScale and Run/Stop

1. AutoScale automatically configures the oscilloscope to best display the input signal by

analyzing any waveforms connected to the channel and external trigger inputs. If AutoScale

fails, your current setup will remain unchanged.

2. Click

a running signal.

3. The auto scaling may take awhile for the application to analyze and adjust the waveform.

4. Once the auto scaling has completed, you will see a best fit waveform displayed on your

graph.

5. Use the Run/Stop button to manually start or stop the oscilloscope acquisition system for

acquiring waveform data.

6. You may click

ME3000 Analog Electronics

Figure B-12 – Cursor Controls

on the oscilloscope toolbar or via the Tools menu once you have obtained

to start or stop acquiring the waveform.

http://dreamcatcher.asia/cw

Lab 6 - 19/19