Anchor Navi-Trac LT/CS Kurulum Talimatları Kılavuzu - Sayfa 9

Çadır Anchor Navi-Trac LT/CS için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Anchor Navi-Trac LT/CS 16 sayfaları. Pavilion 12' to 24' projection

Sayfayı Yazdır

Before placing frame in ﬁ nal position, attach

frame attaching bracket to upright rear upper

splice on each rear upright.

•

Remove stablizer plate, washer and hex nut from rod

on bracket.

•

Insert rod into upright rear upper splice from back of

pavilion.

•

Place stabilizer plate, washer and hex nut back onto

rod so that bracket stays in place. Do not tighten until

frame and fabric are completely assembled and in-

stalled. Do not use stabilizer plate at corner uprights.

Plate for connection to

existing structure.

Stablizer plate, washer

and hex nut

Stablizer plate may not

be used at corner up-

rights. Remove.

Figure 3b

U-Shaped stabilizer may not

be used at corner uprights

due to fabric interference.

Figure 3c