Bosch 3 600 H55 series Talimatlar Kılavuzu - Sayfa 10
Elektrikli Alet Bosch 3 600 H55 series için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Bosch 3 600 H55 series 16 sayfaları. Power tool
Sayfayı Yazdır
- 1. Safety Notes
- 2. General Power Tool Safety Warnings
- 3. Functional Description
- 4. Intended Use
- 5. Product Features
- 6. Technical Data
- 7. Declaration of Conformity
- 8. For Your Safety
- 9. Initial Operation
- 10. Working Advice
- 11. Maintenance and Service
- 12. Maintenance and Cleaning
- 13. Changing the Blade
- 14. After-Sales Service and Customer Assistance
Declaration of Conformity
We declare under our sole responsibility that the product
described under "Technical data" is in conformity with
the following standards or standardization documents:
EN 60745 (battery powered product) and EN 60335 (bat-
tery charger) according to the provisions of the directives
2006/95/EC, 2004/108/EC, 98/37/EC (until
28 Dec 2009), 2006/42/EC (from 29 Dec 2009).
Technical file at:
Bosch Lawn and Garden Ltd., PT-LG/EAE,
Stowmarket, Suffolk IP14 1EY, England
2009
Leinfelden, 05.01.2009
Dr. Egbert Schneider
Senior Vice President
Engineering
Made in UK 2009,
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Assembly
For Your Safety
f Warning! Switch off and engage the safety lock 7 be-
fore adjusting or cleaning.
Battery Charging (see main figure)
f Do not use other battery chargers. The supplied bat-
tery charger is designed for the Lithium-Ion battery in
your machine.
Observe correct mains voltage: The voltage of the power
source must agree with the voltage specified on the
nameplate of the unit. Equipment marked with 230 V can
also be connected to 220 V or 240 V.
The Electronic Cell Protection (ECP) protects the lithium
ion battery against deep discharging. When the battery is
run down or discharged, the machine is shut off by means
of a protective circuit: The blade no longer moves.
WARNING
matically switched off. The battery can be damaged.
Plug the mains plug of the battery charger into a socket
outlet and the charger plug 6 into the socket 5 on the rear
side of the handle.
The battery charge indicator 3 lights up green to indicate
the charging procedure. The battery is fully charged as
soon as the battery charge indicator 3 is no longer lit.
– During the charging procedure, the handle of the ma-
chine warms up. This is normal.
– Disconnect the battery charger from the mains supply
when not using it for longer periods.
– The power tool cannot be used during the charge pro-
cedure; it is not defective when inoperative during the
charging procedure.
f Protect the battery charger against moisture!
Bosch Power Tools
Dr. Eckerhard Strötgen
Head of Product
Certification
Do not continue to press the On/Off
switch after the machine has been auto-
English
Deutsch | 11
F 016 L70 560 | (25.11.08)
2 3
| 3