Anchor Beacon BEA-8000CU2 Kullanıcı El Kitabı - Sayfa 3
Hoparlör Sistemi Anchor Beacon BEA-8000CU2 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Anchor Beacon BEA-8000CU2 13 sayfaları.
Ayrıca Anchor Beacon BEA-8000CU2 için: Kullanıcı El Kitabı (11 sayfalar)
Sayfayı Yazdır
Beacon® Sound System Owners Manual
BEACON ARRANGEMENT
CORRECT SYSTEM PLACEMENT
BEACON AIR ARRANGEMENT
AIR receiver units can be placed within 300+ feet from the main unit without experi-
encing latency and/or breaking wireless connection. When setting up your Anchor AIR
system make sure to place the main transmitter unit in the center so the AIR receiver
units are on either side of the system. It is recommended to face all systems the
same direction as facing systems at each other can result in feedback or distortion.
Anchor AIR System Arrangement
10 20 30 40 50 40 30 20 10
300+ feet
Beacon 8000R Series
AIR Receiver Unit
WRONG SYSTEM PLACEMENT
Microphone
150' max
300+ feet
Beacon 8000X Series
Beacon 8000R Series
AIR Companion Transmitter
(BIG -8000XU4 shown)
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
CONTROLLING FEEDBACK
Feedback, a howling noise or shrill sound, is self-generated by the sound system. It's caused by
a microphone picking up the sound coming from the speaker and then re-amplifying it. Once a
feedback loop starts, it continues until the system is adjusted.
FEEDBACK CAUSES
• Microphone too close, pointing towards or in front of speaker
• Volume setting is too loud for room
• Sound reflecting off hard surfaces
AVOIDING & ELIMINATING FEEDBACK
• Point microphone in a different direction
• Keep microphone away from the speaker
• Place speaker in FRONT of the microphone
• Reduce the sound system volume levels
CAUTION: Feedback can damage your equipment & may be hazardous to hearing.
AIR Receiver Unit
MADE IN USA
SIX YEAR WARRANTY
3