Advanced Industrial Computer RMC-2QD-2 Hızlı Kurulum Kılavuzu - Sayfa 15

Sunucu Advanced Industrial Computer RMC-2QD-2 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Advanced Industrial Computer RMC-2QD-2 17 sayfaları. Advanced industrial computer rmc-2qd-2 chassis: install guide

Sayfayı Yazdır

XI. Installing 5.25" Bay Device

Type A

1. Remove front blanking panel by releasing the 2 screws

2. Attach the two brackets with thumb screw supplied in the accessory kit and install the M3

screws to the both sides of the device

3. Connecting both data and power cables

4. Insert the Device back into the chassis and secure it by tightening the two thumb screws.

(1)

Type B

1. Insert the CD-Rom into the chassis and align the right side bracket pins with the mounting

holes on the right side of CD-ROM.

2. Place the left side bracket the same way and tighten 2 x M3 screws.

Type C

Release 2 screws to remove 5.25" shield. Install each CD-Rom by 4 x M3 screws in the both side

of bracket

(2)

(1)

- Page 15 of 17 -

(3)

(2)

(4)