Electrolux ASF65090 Kullanıcı Kılavuzu - Sayfa 5

Bulaşık Makinesi Electrolux ASF65090 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Electrolux ASF65090 20 sayfaları.

Sayfayı Yazdır

Rinse aid

1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while

a washing programme operates.

Programme selection buttons

With these buttons you can select the wash-

ing programme. Press a programme button,

the related indicator light comes on. Refer to

'Washing programmes' chapter for more da-

ta about the washing programmes.

Delay start button

Use the delay start button to delay the start

of the washing programme with an interval

between 1 and 19 hours. Refer to the chapter

'Setting and starting a washing programme'.

Digital display

The display shows:

• the set level of the water softener.

• Remaining time to the end of the pro-

gramme.

• Activation/deactivation of the rinse aid dis-

penser (only with multitab function on).

• End of the washing programme. The dis-

play shows a zero.

• Number of hours in delay start.

• Fault codes.

Function buttons

Use the function buttons for these opera-

tions:

• To set the water softener. Refer to the

chapter 'Setting the water softener'.

Use of the appliance

Refer to the following instructions for each

step of procedure:

1. Make a check if the water softener level

is correct for the water hardness in your

area. If necessary set the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the dish-

washer.

Setting the water softener

The water softener removes minerals and

salts from the water supply. Minerals and

Indicator lights

The indicator light comes on when it is necessary

to fill the rinse aid. Refer to 'Use of rinse aid'.

• To cancel the washing programme in pro-

gress or a delay start in progress. Refer to

the chapter 'Setting and starting a washing

programme'.

• To activate/deactivate the multitab func-

tion. Refer to the chapter 'Multitab func-

tion'.

• To deactivate/activate the rinse aid dis-

penser, when multitab function is active.

Refer to the chapter 'Multitab function'.

Setting mode

When you press the on/off button and all

programme indicator lights come on, the ap-

pliance is in setting mode.

The appliance must be in setting mode for

these operations:

– To set a washing programme.

– To set the water softener level.

– To deactivate/activate the rinse aid dis-

penser.

When you press the on/off button and only

one programme indicator light comes on,

cancel the programme to go back to the set-

ting mode. Refer to the chapter 'Setting and

starting a washing programme'.

5. Set the correct washing programme for

the type of load and soil.

6. Fill the detergent dispenser with the cor-

rect quantity of detergent.

7. Start the washing programme.

If you use combi detergent tablets ('3 in

1', '4 in 1', '5 in 1', etc.), refer to the

chapter 'Multitab function'.

salts can have bad effect on the operation of

the appliance.

electrolux 5