Changing the light bulb
Warning! There is a risk of electric shocks!
1
Before changing the light bulb, switch off the
appliance and unplug it, or pull the fuse or
the circuit breaker.
Light bulb data: 220-240 V, max. 15 W, fitting: E 14
1. To switch off the appliance, turn the temperature
regulator to position "0".
2. Unplug the mains plug.
3. To change the light bulb, undo the cross head
screw and remove the light bulb cover.
4. Change the defective light bulb.
5. Refit the light bulb cover and the cross head
screw.
Noises during Operation
The following noises are characteristic of refrigeration
appliances:
•
Clicks
Whenever the compressor switches on or off, a
click can be heard.
Regulations, Standards, Guidelines
This appliance was designed for household use and
was manufactured in accordance with the appropriate
standards. The necessary measures in accordance
with appliance safety legislation regulations (GSG),
accident prevention regulations for refrigeration appli-
ances (VBG 20) and the regulations of the German
Society of Electrical Engineers (VDE) were observed
in the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
34
•
Humming
As soon as the compressor is in operation, you
can hear it humming.
•
Bubbling/Splashing
When refrigerant flows into thin tubes, you can
hear bubbling or splashing noises. Even after the
compressor has been switched off, this noise can
be heard for a short time.
;
This appliance is in accordance with the fol-
lowing EU guidelines:
– 73/23/EWG dated 19 February 1973 - low
voltage guidelines.
– 89/336/EWG dated 3 May 1989
(including guideline change notice 92/31/
EWG) - EMV guideline
– 94/2/EG dated 21. 01. 1994 - Directive on
Energy Labelling
– 96/57 EG dated 3. 9. 1996 - Energy Effi-
ciency Requirements of Household Elec-
tric
Refrigerators,
Combinations Thereof.
Freezers
and
Sayfayı Yazdır