Anchor Systems 46913 Kullanım Talimatları ve Teknik Bilgiler - Sayfa 4

Güç Paketi Anchor Systems 46913 için çevrimiçi göz atın veya pdf Kullanım Talimatları ve Teknik Bilgiler indirin. Anchor Systems 46913 16 sayfaları. 20-30l hydraulic power pack

Sayfayı Yazdır

Have any questions?

01342 719 362

Hydraulic Power Pack

Power Pack Operation

The safe operation of this equipment is the responsibility of the operator.

PRE-OPERATION CHECK LIST

1. Keep bystanders away from the machine.

2. Ensure you are aware of the environment you are working in; including overhead cable,

underground installations etc.

3. Observe all safety instructions and warnings.

OPERATION

1. Ensure the hydraulic hoses are connected to both the powerpack and attachment.

2. Turn the valve block lever to the OFF position when starting and stopping the engine.

3. Turn the switch to the ON position to allow the engine to start.

4. Ensure the auto throttle is NOT locked in HIGH.

5. Pull the pull-cord to start the engine.

6. Turn the flow control valve to ON.

7. Check the oil level in the reservoir (if using new and empty hoses) and fill up if needed.

Figure 1 – Operation 1