Anchor-Caddie TMB101 Talimatlar Kılavuzu - Sayfa 6
Tekne Ekipmanları Anchor-Caddie TMB101 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Anchor-Caddie TMB101 6 sayfaları. Trolling motor bracket adapter kit
Sayfayı YazdırTrolling Motor Bracket Adapter Kit (TMB101)
Step 7 of 8
Mount the Base Bracket to your quick release bracket top plate
You will want to use the anti-seize compound in this step.
Using the hardware that came
with your Minn Kota or
Motorguide quick release
bracket, insert the 6 screws
from the underside of your
top plate through the Base
Bracket, insert the flat washer
and loosely screw the nuts on.
Step 8 of 8
Mount your Anchor Caddie with the Top Mount Plate onto the Bottom Mounting Plate
Set your quick release top
plate on the base plate and
secure per the manufacturer's
instructions.
™ 2021 Anchor-Caddie
If your quick release
bracket has the latch
post, make sure you
insert that before
putting that screw in or
you will be taking that
out to insert it. Don't
ask me how I know that
Set your Anchor
Caddie onto the
Bottom Mounting
Plate.
Thanks again for choosing Anchor Caddie!
Make any final adjustment by
moving your adapter kit
forward or back to maintain a
good center alignment.
Using the supplied
hardware, install the 4
screws, flat and lock
washers.
Remove it and tighten down
all 6 screws.
Tighten down all 4 screws and the
installation is complete,
congratulations!
Page 6 of 6