Dream Vision Very BEST Kurulum Kılavuzu - Sayfa 6

Projektör Dream Vision Very BEST için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dream Vision Very BEST 16 sayfaları.

INSTALLATION

Minimum distance

The distance between the lens of the projector and the Very BEST 3D Passive Kit window must be at least 8 cm.

Important limitation: the projector minimum Throw Ratio

Before making any installation, make sure that the projector throw ratio is compatible with the configuration

required. To be compatible, the TR must be at least 0.55:1, and the environment setup would be as such that the

light beam can use the maximum surface of the frame window. The light beam should go through the polarizing

window without touching the metallic frame.

3.2 Polarizer Position

Optimum window fill ratio

To optimize the Very BEST 3D Passive Kit performances, the projected picture must completely fill the polarizing

window. Depending on the configured zoom, the distance to the kit may vary.

Adjust the projection zoom and distance to obtain the maximum fill ratio.

It is important to ensure that the device is compatible with the configuration required. The "Throw Ratio"

must be > 0.55:1 to ensure that the minimum distance of 8 cm is attained and that the projector light

beam doesn't go beyond the frame limits.

8cm minimum

Minimum distance to the projector lens must be at least 8 cm.

R699867 - Very BEST 3D Passive Kit User Manual