Electrolux ESF 2420 Enstitü Kitabı - Sayfa 7

Bulaşık Makinesi Electrolux ESF 2420 için çevrimiçi göz atın veya pdf Enstitü Kitabı indirin. Electrolux ESF 2420 16 sayfaları. Dishwasher
Ayrıca Electrolux ESF 2420 için: Talimat Kitabı (20 sayfalar)

Sayfayı Yazdır

Setting of the water softener

To prevent limescaling on the dishes and to the interior of the

dishwasher, the dishes must be washed with soft water.

This dishwasher is equipped with a water softener, where tap-

water which is harder than 4 °d (german degree) is softened.

Adjust the water softener according to the table below for the

water hardness level for your area.

Water hardness level

°d

> 24

22 - 24

20 - 22

18 - 20

16 - 18

13 - 16

10 - 13

7 - 10

4 - 7

below 4

1) german degree of measurement for the water hardness

2) millimol, internationel unit for water hardness

*) factory setting

In the following setting, the dishwasher must be switched off and all programmes completed.

See chapter "Using the appliance" for information on how to complete the programme.

1. Press the start button and hold it pressed in.

2. Turn the programme selector clockwise to the

ﬁrst programme. When the indicator for the start

button and for the ended programme cycle starts

to ﬂash, you can release the start button.

- The number of ﬂashes for the ended programme

cycle are equivalent to the set water hardness

level.

- This sequence of ﬂashes is repeated several

times after a few seconds pause.

3. The water hardness level is raised by 1 step

every time you press the start button.

After hardness level 10 comes hardness level 1.

4. Turn the programme selector to the "Reset"

position when the required water hardness level

is selected. This saves the required setting.

If the setting 1 is chosen, the salt indicator lamp

is not lit.

mmol/l

> 4,2

3,9 - 4,2

3,6 - 3,9

3,2 - 3,6

2,8 - 3,2

2,3 - 2,8

1,8 - 2,3

1,2 - 1,8

0,7 - 1,2

below 0,7

- 7 -

Contact your local Water Authority to ﬁnd the

exact water hardness level for your area.

The water softener has 10 settings:

Setting on the

water softener

5 *

no salt is needed

Number of

light ﬂashes