Electrolux ESF 6146 S-Visi Talimat Kitabı - Sayfa 12

Bulaşık Makinesi Electrolux ESF 6146 S-Visi için çevrimiçi göz atın veya pdf Talimat Kitabı indirin. Electrolux ESF 6146 S-Visi 18 sayfaları.

Sayfayı Yazdır

Removable knife basket

Warning!

Long bladed knives stored in an upright position are a

potential hazard.

Long and/or sharp items of cutlery such as carving knives

must be placed horizontally in the removable knife basket,

which is positioned at the front of the upper basket.

Take care when loading or unloading sharp items such as

knives.

The cutlery basket

Forks and spoons should be placed in the removable cutlery

basket with the handles facing downwards and the knives with

their handles facing upwards.

If the handles protrude from the bottom of the basket,

obstructing the lower spray arm, load the cutlery with the

handles facing upwards.

Mix spoons with other cutlery to prevent them from sticking

together.

For best results we

recommend you to use the

cutlery grids provided (if the

size and dimensions of the

cutlery allow it).

The cutlery basket is in two

parts which can be

separated to give greater

loading flexibility. To separate

the two parts, slide them

horizontally in opposite

directions and pull them

apart. To reassemble,

reverse the procedure.

The upper basket

The upper basket is designed for plates (dessert plates,

saucers, dinner plates of up to 24 cm in diameter), salad

bowls, cups and glasses.

Arrange items on and

underneath the cup racks so

that water can reach all

surfaces.

For taller items, the cup racks

can be folded upwards.

Light items (plastic bowls

etc.) must be loaded in the

upper basket and arranged

so they do not move.

For glasses with long stems

(according to the size and

dimensions), upset the glass

holder to the left-hand or

right-hand position.

In case you need to load

dishes in the upper basket,

the glass holder must be in

the right-hand position.

In case that plates are loaded in the upper

basket:

load them starting from the

rear positions of the

basket; tilting them slightly

forwards and avoiding the

front positions near the

door.

Attention!

Ensure that the load does not cover the integrated rinse

aid and detergent dispenser.

Before closing the door, ensure that the spray arms can

rotate freely.