Common Sense RC SNAP&FLY Kullanıcı El Kitabı - Sayfa 9

Oyuncak Common Sense RC SNAP&FLY için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Common Sense RC SNAP&FLY 17 sayfaları. 3-in-1 rtf modular airplane system

Sayfayı Yazdır

SNAP&FLY -- Modularized RC Airplanes

Photo 3A – The transmitter overview

(a) "On-Charge-Off" 3-position switch –

Switch to the "On"("Off") position to turn the transmitter on (off);

Switch to the "Charge" position to turn on the built-in dual-position LiPo battery

charger;

(Make sure 4 AA 1.5V batteries are installed in the transmitter battery

compartment before powering up the transmitter;)

(b) The transmitter state LED –

Off: the "On-Charge-Off" 3-position switch is at ether "off" or "Charge";

On continuously: the transmitter is on and in its normal working state;

Flashing in the first 4 seconds after the transmitter is turned on: the transmitter is

executing its "frequency lock" sequence;

Flashing steadily for longer than 4 seconds: low transmitter battery is indicated;

Select the transmitter working frequency;

(d) 8-position Mixing Dial –

Select a control mixing to fly a particular airplane type;

(e) and (f ): Left and Right Proportional-Control-Levers, (g), (h), (i), (j): trimmers –

are for the proportional controls of the throttle and 2 actuators. (The 3

control is not used in this product).

www.itcanfly.com

actuator