Atheros AR5BCB-00013 Hızlı Başlangıç Kılavuzu - Sayfa 3

Bilgisayar Donanımı Atheros AR5BCB-00013 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Atheros AR5BCB-00013 6 sayfaları.

Quick Start Guide
This Quick Start Guide is intended for users familiar with PC Card and driver
installation for Windows 98, Windows ME, and Windows 2000.
Refer to "Installing the Documentation" on page four of this Quick Start Guide for
information on setting up the online documentation.
Installation for Windows 98, ME, and Windows 2000
Before installing the driver, you will need a copy of the operating system
installation media, usually a CD supplied with your computer or operating
system. On Windows 98 systems, the installation files are sometimes archived
on the hard disk in C:\WINDOWS\OPTIONS\CABS. On Windows 2000
systems, you may be prompted to load operating system files from the Windows
2000 installation disk.
You will also need the End User Utilities CD supplied with your PC Card. the
Setup program installs configuration utilities in the Network application in the
Control Panel.
Run Setup from the End User Utilities CD
1
. Turn on your computer.
1
.
2
. Put the End User Utilities CD in the CD-ROM drive.
2
.
The setup program should start automatically. If it does not start, you can run it
manually by selecting Run from the Start menu and running SETUP.EXE from the CD-
ROM Drive.
3
. On the WLAN Menu screen, select Installation for Windows.
3
.
4
. Select Adapter Installation Instructions. Follow the instructions as they
4
.
appear on the screen.
5
. When prompted, insert the PC Card into the PC Card slot (Figure 1). Align the
5
.
card properly before putting it in the slot. Insert the card firmly without forcing
until it seats snugly.
!
CAUTION: Forcing a misaligned card into the slot can damage the computer or the
card.
The driver-installation procedure guides you through the steps standard for your
operating system. If you are unfamiliar with driver-installation procedures, refer to the
Network Interface Card User Guide for details. You will be asked to supply CDs or
directory-path information for the End User Utilities CD and your operation-system
software.
The setup program will install and open the Network application in the Control Panel
as part of the driver-installation process.