AND UA-704 Kullanım Kılavuzu - Sayfa 13

Kan Basıncı Monitörü AND UA-704 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AND UA-704 16 sayfaları.
Ayrıca AND UA-704 için: Kullanım Kılavuzu (16 sayfalar)

Sayfayı Yazdır
AND UA-704 Kullanım Kılavuzu
Problem
Nothing
appears in the
display, even
when the power
is turned on.
The unit does
not measure.
Readings are
too high or too
low.
Other
Note: If the actions described above do not solve the problem, contact the dealer.
Do not attempt to open or repair this product, as any attempt to do so will make
your warranty invalid.

Troubleshooting

Possible Reason
Battery is drained.
Battery polarities are not
in the correct position.
The cuff is not fastened
properly.
You moved your arm or
body during the
measurement.
The cuff position is not
correct.
The value is different from
that measured at a clinic
or doctor's office.
ENGLISH 11
Recommended Action
Replace with a new battery.
Reinstall the battery with their
negative and positive end
matching those indicated in the
battery compartment.
Fasten the cuff correctly.
Make sure you remain very still
and quiet during the
measurement.
Sit comfortably and still.
Raise your hand so that the cuff
is at the same level as your heart.
If you have a very weak or
irregular heart beat, the device
may have difficulty in determining
your blood pressure.
See "Why measure blood
pressure at home?".
Remove the battery. Place them
back properly and try the
measurement again.