AND UA-704 Kullanım Kılavuzu - Sayfa 10
Kan Basıncı Monitörü AND UA-704 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AND UA-704 16 sayfaları.
Ayrıca AND UA-704 için: Kullanım Kılavuzu (16 sayfalar)
Sayfayı Yazdır
1. Place the cuff on the arm (preferably the left arm).
2. Press the
START
When the
START
display symbols will be displayed for about one
second.
When the " 0 " is blinking, the device is ready for
measurement. If the
cuff has some air trapped in it. Press the
exhaust valve button until the
displayed.
3. Pressurize the cuff by squeezing
the rubber bulb.
The figure on the left of the
display shows the current
pressure as you inflate the
cuff.
Stop squeezing the rubber
bulb when the
disappears.
4. When pressurization is complete,
the automatic exhaust
mechanism will gradually reduce
the pressure in the cuff and the
mark will be displayed along
with the current pressure reading
on the left.
Remain
measurement. When a pulse
is detected, the
blink with each pulse beat.
5. When
the
measurement
complete,
the
displayed. The systolic pressure
is displayed on the left. The
diastolic is displayed on the
right. The pulse rate alternates
with the systolic and diastolic
displays.
Measurement
button.
button is pressed, all of the
mark is displayed, the
mark
still
during
mark will
is
mark
is
English 9
mark is
Stop squeezing the
bulb when the
mark disappears.
The mark blinks
when the pulse is
detected
Current pressure.
Automatic air release.
Gradually being reduced.
Measurement in
progress.
Blinking
Systolic pressure
Diastolic pressure
Alternating display
Pulse rate
button
START
Squeeze the bulb
Bulb
To the next page