AND UA-767 Plus BT Kullanım Kılavuzu - Sayfa 9

Kan Basıncı Monitörü AND UA-767 Plus BT için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AND UA-767 Plus BT 17 sayfaları.

Sayfayı Yazdır

Applying the Arm Cuff

1. Wrap the cuff around the upper arm,

about 1-2 cm above the inside of

the elbow, as shown.

Place the cuff directly against the

skin, as clothing may cause a faint

pulse, and result in a measurement

error.

2. Constriction of the upper arm,

caused by tightly rolling up a

shirtsleeve, may prevent accurate

readings.

3. Confirm that the index

within the proper fit range.

How to Take Proper Measurements

For the most accurate blood pressure measurement:

Sit comfortably on a chair. Rest your arm on the table. Do not cross your

legs. Keep your feet on the floor and straighten your back.

Relax before measurement.

Place the center of the cuff at the same height as your heart.

Remain still and keep quiet during measurement.

Do not measure immediately after physical exercise or a bath. Rest before

taking the measurement.

Try to measure your blood pressure at the same time every day.

Measurement

During measurement, it is normal for the cuff to feel very tight. (Do not be

alarmed)

After Measurement

After measurement, press the

Remove the cuff and record your data.

Note: The device has an automatic power shut-off function, which turns the

power off approximately one minute after measurement.

Allow at least three minutes between measurements on the same person.

Using the Monitor

points

English 8

Do not roll up shirtsleeve tightly

Cuff

Secure the fabric

fastener firmly

Index

and Proper fit range

button to turn off the power.

START

1 to 2 cm

Artery position mark

Air hose