formlabs Form Wash Hızlı Başlangıç Kılavuzu - Sayfa 8

Ultrasonik Mücevher Temizleyici formlabs Form Wash için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. formlabs Form Wash 13 sayfaları.

Sayfayı Yazdır

MAINTENANCE

As more parts are cleaned, the IPA gradually becomes more

concentrated with liquid resin, reducing the effectiveness of Form

Wash. As IPA evaporates, add fresh IPA to keep the fill level between

the minimum and maximum lines. Use the hydrometer to check the

IPA resin concentration between cleaning cycles, and replace IPA

as needed for the cleanest parts.

Checking IPA Resin Concentration

To check whether the IPA is suitable for cleaning parts, lower

the mount, open the outer lid, and float the previously calibrated

hydrometer in the wash bucket. Note the alignment of the O-ring

relative to the float's wings.

As the IPA resin concentration increases, the weight will float higher,

and the stem and O-ring will rise. For a smooth, dry surface finish,

replace IPA when the O-ring rises above the float's tall wings.

CAUTION: Wear gloves when handling parts

and surfaces with IPA or uncured resin.

Change IPA if O-ring

is above tall wings.