CommScope 5NPX1006F Kurulum Talimatları Kılavuzu - Sayfa 2
Anten CommScope 5NPX1006F için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. CommScope 5NPX1006F 8 sayfaları. Multi-beam panel antenna
Sayfayı Yazdır
Multi-Beam Panel Antenna 5NPX1006F
Installation Instructions
•
•
Installation Instructions - Fixed Downtilt Mounting Kit (F-042-GL-E)
Assemble both mounting brackets to the antenna as per Figures 1, 2 & 3 of this document.
Attach the mounting kit assembly to the antenna, before trying to clamp the brackets
to the pole.
The clamp brackets can clamp pipe diameters between 60mm (2.4") & 115mm (4.5").
For typical installations the minimum recommended pipe diameter is 75mm (3").
Figure 1. Correctly Assembled
Mounting Brackets
Ensure a torque spanner is used when tightening fasteners, see the mounting kit
diagrams on the following pages for the correct torque recommendations.
Ensure antenna is installed with the connectors and drainage holes at the bottom.
Bulletin D701-0005 • Revision D • July 2013 page 2 of 8