Carmanah G Series Manuel - Sayfa 7

Radar Carmanah G Series için çevrimiçi göz atın veya pdf Manuel indirin. Carmanah G Series 10 sayfaları. Rrfb mast arm kit
Ayrıca Carmanah G Series için: Hızlı Başlangıç Kılavuzu (16 sayfalar), Manuel (11 sayfalar), Enerji Yönetim Sistemi Değiştirme Kılavuzu (12 sayfalar), Dolap Kapağı Değiştirme Kılavuzu (10 sayfalar), Manuel (9 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kurulum Kılavuzu (14 sayfalar), Manuel (10 sayfalar), Kurulum Kılavuzu (18 sayfalar)

3. Remove the AC input wires from the terminal blocks (line, neutral, and ground). Cap them off with wire

nuts one at a time. Ensure the wires are not live before proceeding forward.

4. Remove the four screws securing the AC backplane and remove from the cabinet.

5. Remove ground wire from the bus bar:

a. If you have the optional Polara XAV push button controller installed on the left side of the cabinet,

disconnect the ground wire from the bus bar and secure it to one of the nearest grounding

screws. It is recommended to terminate with a ring terminal.

b. If you do not have the optional Polara XAV push button, remove the ground wire from the system.

There will be a ground wire that remains from the cabinet door to the inner cabinet.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

AC TO SOLAR RETROFIT GUIDE

carmanah.com