ATI Audio DDA416 Kullanım ve Bakım Kılavuzu - Sayfa 3
Amplifikatör ATI Audio DDA416 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. ATI Audio DDA416 14 sayfaları. Quad 1x4 aes/ebu distribution amplifier and 1x6 clock distribution amplifier
Sayfayı Yazdır
SAFETY INFORMATION
To reduce risk of electric shock, do not remove covers. There are no user-serviceable items inside.
Please refer servicing to qualified personnel.
UNPACKING
Examine all shipping cartons for external damage and retain all damaged cartons for inspection by
the carrier. Examine all equipment for any sign of damage. Do not connect AC mains power to a
unit which appears to be damaged. Contact the carrier to file a damage claim.
INSTALLATION LOCATION
This equipment must be installed in a location meeting the environmental conditions specified
below. Adequate cooling must be provided if units are to be operated in high temperature
locations. Exposure to liquid and condensation must be avoided.
GROUNDING
This equipment is connected to earth through the center conductor of the AC mains cable. Proper
grounding protects operators from electric shock, and it must be maintained whenever the unit is
connected to AC.
ELECTROMAGNETIC COMPATIBILITY
This unit complies with electromagnetic requirements described in EMC Directive 2004/108/EC
and FCC Part 15. This unit does not generate undue electromagnetic interference, and is
adequately protected against electromagnetic interference so that it can operate properly.
MAINTENANCE
This unit requires no maintenance other than periodic wiping with a soft dry cloth to remove any
dust or contaminating substances. Do not use solvents for cleaning.
DECLARATIONS OF CONFORMITY
Class B Equipment – FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to FCC CFR 47, Part 15.
CE Declaration of Conformity
ATI Audio Inc., West Berlin, New Jersey 08091 USA, declares that all Model DDA-416/WC106
units are in conformity with the following EU regulations and amendments:
Low Voltage Directive (LVD) 2006/95/EC (replaces 73/23/EEC)
Electromagnetic Compatibility (EMC): EMC Directive 2004/108/EC
EMC: EN55103-1/-2:2009,
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
3
DDA-‐416/WC106
M anual