ATI Audio HDA400 Kullanım ve Bakım Kılavuzu - Sayfa 3

Amplifikatör ATI Audio HDA400 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. ATI Audio HDA400 3 sayfaları. Stereo headphone amplifier

Sayfayı Yazdır

Use only TRS output plugs and stereo headphones. The use of TS plugs on

mono headphones shorts one headphone output to ground. Although this will not

damage the HDA400, it will load down the power supply and reduce maximum

output levels to the other output channels. Output TRS plugs should all be wired

left to TIP, Right to RING and common to SHIELD.

CAUTION

The HDA400 provides a comfortable listening level of 1mW at around 12 o'clock

on the volume control for most headsets. The HDA400 is capable of driving many

headsets to DANGEROUS LEVELS over 120dB SPL. If you can hear distortion,

it's TOO LOUD! Levels near 120dB SPL can easily cause PERMANENT

HEARING DAMAGE, BE CAREFUL! Treat your ears with tender loving care and

they will follow you anywhere.

PERFORMANCE SPECIFICATIONS

OUTPUTS:

DYNAMIC RANGE: 110dB Typical at output into 600-ohm headphones

DISTORTION:

RESPONSE:

GAIN:

NOISE:

SEPARATION:

INPUTS:

INDICATORS:

POWER:

SIZE:

Four high compliance 6V/80mA stereo drivers capable of

over 100mW into 32 to 600 ohm stereo headphones

.10% THD maximum, 20-20000 Hz, below clipping

+0/-.5dB, 20-20000 Hz

26dB maximum

-90dBu E.I.N., 20 – 20000 Hz

70dB minimum at 1kHz

Stereo, 20K balanced, bridging, -10/+4dBu nominal

INPUT CLIP - onset of input stage clipping, Yellow LED

POWER – monitors internal DC voltage - Red LED

115/230VAC, 50/60Hz, 24VA, and IEC320 3 pin connector

1RU package; 19" (48.3cm) W x 1 ¾" (4.5cm) H x 7.5"

(19.05cm) D 15lbs (6Kg)

audio.com