Carmanah F Series Kurulum Kılavuzu - Sayfa 9

Aydınlatma Ekipmanları Carmanah F Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Carmanah F Series 16 sayfaları. Rrfb mast arm kit
Ayrıca Carmanah F Series için: Hızlı Başlangıç Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Enerji Yönetim Sistemi Değiştirme Kılavuzu (12 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Değiştirme Kılavuzu (9 sayfalar), Kurulum Kılavuzu (18 sayfalar)

Sayfayı Yazdır
Carmanah F Series Kurulum Kılavuzu
8. Obtain 3" of red and 3" of black wire supplied with the kit.
•
Strip ends of both wires 0.35".
•
Use small flat bladed screwdriver to depress each terminal button and insert the wire into the
terminal.
•
Install one end of the red wire into the left BAT+ terminal.
•
Install one end of the black wire into the right BAT- terminal.
•
Insert the other end of each wire into two of the 5-position splice terminals.
9. Route the two red battery harness wires into the splice terminal with the red wire from BAT+.
10. Route the two black battery harness wires into the splice terminal with the black wire BAT-.
Make sure all wire strands go into the terminal hole.
11. Obtain 3" of red wire supplied with the kit and strip both ends to 0.35".
12. Insert one end of 3" red wire into PBS+ terminal.
13. Route modified AI harness wires (from steps 1-4, violet/blue/black/red/yellow) into the hole shown.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
APPLIED INFORMATION (AI) INTEGRATION
INSTALL GUIDE
9
|
carmanah.com